






Dental Chair Camera Light with 4K Video
Combine adjustable chair-side illumination with an integrated camera for video recording, still-image capture and display workflows.
- Lighting: 8 LEDs with white, warm and mixed modes
- Camera: 8 MP CMOS; 3840 × 2160 resolution listed
- Output: HDMI 4K, 1080p and 720p modes
- Lens: 10× optical zoom, supplied specification
- Controls: Non-touch light sensor and infrared camera remote
- Storage: TF card support up to 512 GB
The dental chair camera light brings an LED operating light and a centrally positioned camera into one lamp head. The supplied product material shows two four-LED panels, side handles, a digital display and a non-touch induction switch. Camera functions include recording, still-image capture, image freeze, zoom and focus controls through the illustrated remote.
RIXI Medical supplies dental equipment for clinic owners and distributors from Foshan, China. This product can be discussed as part of a new dental chair package or a replacement-light project, subject to confirmation of the mounting interface, arm load, electrical supply and video cable route.
Adjustable White, Warm and Mixed Illumination
The light uses four white and four yellow LEDs. The supplied chart lists separate illuminance ranges for white, yellow and mixed light. A digital display is shown on the lamp head, and the induction switch provides non-touch light control. Confirm the exact adjustment sequence and cleaning instructions in the current model manual.
The listed 700 mm working distance and 70 × 150 mm spot size are supplier specifications. Ask for the applicable measurement conditions when evaluating the proposed installation. The IPX0 rating should be considered when planning cleaning and handling; do not assume that the complete lamp head or its handles can be immersed or sterilized.
Integrated Camera, HDMI Output and Local Storage
The camera table lists a 1/2.8-inch CMOS sensor, 8 MP effective pixels and 3840 × 2160 resolution. HDMI output modes include 4K, 1080p and 720p. The stated frame rates vary by mode, so confirm the chosen resolution and frame rate with the intended display or capture device before ordering.
The supplied lens specification is 10× optical zoom. The remote illustration shows photo capture, video, image freeze, zoom, near/far focus, autofocus, brightness adjustment, image mode, source selection and document viewing. The specification identifies infrared remote control; it does not establish Wi-Fi or network streaming capability.
Local storage is listed as TF card support up to 512 GB. A 512 GB card is not confirmed as a standard included item. Request the approved card type, recording format, export procedure and supplied accessory list. The screen pictured in the promotional illustration should also be confirmed separately in the quotation.
LED Light Specifications
| Light configuration | 8 LEDs: 4 white LEDs + 4 yellow LEDs |
|---|---|
| Mixed-light illuminance | 8,000–45,000 lux |
| White-light illuminance | 8,000–35,000 lux |
| Yellow-light illuminance | 7,000–20,000 lux |
| Power consumption | Less than 15 VA |
| Spot size | 70 × 150 mm |
| Working distance | 700 mm |
| Color temperature | 3,000–6,400 K |
| Color rendering index | Ra ≥90 |
| Input voltage | AC 24 V (±10%), 50/60 Hz |
| Protection rating | IPX0 |
| Working mode | Continuous operation |
| LED light weight | 2.0 kg, as listed in the supplied light specification |
Camera Specifications
| Image sensor | 1/2.8-inch CMOS |
|---|---|
| Effective pixels | 8 MP (3840 × 2160) |
| Video output | HDMI: 4K / 1080p / 720p |
| Listed frame rates | 4K 30 fps; 1080p 30 fps; 720p 120 fps or 60 fps |
| Lens | 10× optical zoom, supplied specification |
| Focus / gain / white balance | Auto / push, as listed in the supplied specification |
| Camera control | Infrared remote |
| Dynamic range | 71 dB |
| Signal-to-noise ratio | 50 dB |
| Local storage | TF card, up to 512 GB; confirm card inclusion and compatibility |
| Operating conditions | 10–40°C; 30–85% RH |
| Camera lamp weight | 2.20 kg, as listed in the supplied camera specification |
Specification scope: These values reproduce the supplied product parameter image and are not independent test results. The light table lists 2.0 kg, while the camera-lamp table lists 2.20 kg. Confirm the complete installed assembly weight, mount drawing, model identifier and final datasheet before approving a chair arm or shipping order.
Mounting and Order Configuration
For an existing chair, send the chair and light-arm model, photographs of the current connection and available mounting dimensions. Ask the supplier to confirm the connector, permitted load, movement clearance, AC 24 V supply and cable routing. Compatibility with a particular RIXI chair or another manufacturer’s chair must be confirmed for the exact installation.
- Confirm whether the quotation is for the lamp head only or includes an arm and mounting accessories.
- Identify the remote, video cable, storage card, display and power components included with the order.
- Request the cleaning instructions for the head, lens, handles and remote.
- Agree on a receiving check for model identity, accessories, light modes, camera output and recording functions.
Review the dental lamp range and dental chair configurations when preparing a package. Use the technical support page for a model-specific compatibility enquiry.
Product Images and Control Details






Frequently Asked Questions
Does this dental light include a camera?
The supplied product images and specification show a central integrated camera with 8 MP resolution and HDMI video output. Confirm the ordered model and complete camera package in the quotation.
Is a monitor or 512 GB TF card included?
Inclusion is not established by the supplied images. The parameter table states TF card support up to 512 GB. Ask for a line-by-line packing list covering the card, display, remote, cables and mounting components.
Can the lamp be fitted to any dental chair?
Universal compatibility is not confirmed. The mounting interface, arm load, supply voltage, clearance and cable path must be checked for the exact chair and lamp configuration by a qualified equipment technician.
What should be confirmed for image recording?
Confirm display and capture-device compatibility, selected HDMI mode, recording format, storage media and file export. The clinic should manage access and any patient images under its own applicable consent and information-handling procedures.
Request a Camera Light Configuration
Request the current datasheet, mounting drawing, accessory list and distributor quotation. Include your chair model, installation photos, destination and preferred video-output configuration.
Need Dental Equipment Pricing or Configuration Details?
Contact RIXI Medical for model comparison, distributor pricing, packaging information, OEM/ODM requirements and after-sales support.
Request Product Information