Dental Electric Motor with LED
Review the E-type motor connection, LED light, three ratio settings and memory controls before confirming your handpiece and dental unit configuration.
- Motor speed: 2,000–40,000 rpm
- Ratio settings: 16:1, 1:1 and 1:5
- Controls: Forward/reverse, speed adjustment and M1/M2/M3 memory buttons
- Lighting: Built-in LED at the motor coupling
- Connection: E-type motor interface; confirm 2-hole or 4-hole supply configuration
- Order scope: Confirm compatible handpieces, adapter and accessories
RIXI Medical Dental Electric Motor with LED combines a desktop control unit, a motor handle and a connected cable for professional dental equipment configurations. The front panel provides gear-ratio selection, rotation-direction selection, speed adjustment and three memory buttons. The illustrated package includes the control unit, motor, power adapter, manual and small spare parts.
Motor Controls and Handpiece Matching
Selecting a ratio on the panel does not change the mechanical ratio of the attached handpiece. Match the displayed setting to the actual compatible handpiece and confirm its permitted operating limits. The motor specification lists 2,000–40,000 rpm; the higher output range shown for a 1:5 speed-increasing handpiece is not the motor’s own shaft-speed range.
| Handpiece ratio setting | Illustrated output speed range | Procurement check |
|---|---|---|
| 16:1 reduction | 100–2,500 min⁻¹ | Confirm the exact approved reduction handpiece and usable lower speed |
| 1:1 direct drive | 2,000–40,000 min⁻¹ | Confirm the E-type connection and handpiece operating limit |
| 1:5 speed increase | 10,000–200,000 min⁻¹ | Confirm the rated handpiece, bur and cooling requirements |
The ranges above reproduce the supplied ratio chart. Request the current model manual for operating limits; the 16:1 chart’s lower endpoint should be confirmed rather than calculated from the stated motor minimum. Use the manufacturer’s instructions for operation and maintenance.
Core Product Specifications
| Product type | Dental electric motor with separate control unit |
|---|---|
| Motor speed range | 2,000–40,000 rpm, supplied specification |
| Motor torque | 3.5 N·cm, supplied specification |
| Rated operating supply | 36 V, 2 A; confirm approved power adapter |
| Motor interface | E-type connector |
| Motor dimensions | Approximately Ø22 × 75 mm, supplied specification |
| Motor cable length | Approximately 1.65 m, supplied specification |
| Lighting | Built-in LED |
| Memory controls | M1, M2 and M3 |
| Rotation | Forward/reverse selection |
| Rear connections shown | DC adapter, motor cable and 2/4-hole standard connector configuration |
Confirm the complete model-specific drawing, connector option, electrical input and utility requirements before integrating this unit with a dental chair. Final dimensions and shipping weight are supplied with the quotation.
Illustrated Package Contents
- Main control unit
- Electric motor handle and cable assembly
- DC power adapter and cable
- Instruction manual
- Small spare parts shown in the kit photo
A contra-angle or straight handpiece is not identified in the illustrated packing list. Confirm whether your required handpiece is included or ordered separately, along with the connector option and destination plug.
Product Detail Views
Configuration and Distributor Enquiries
RIXI Medical supplies dental equipment for clinic and distributor procurement. Send the existing dental unit connection details, required handpiece ratio and order quantity when requesting a configuration. Browse our dental handpiece range and low-speed handpiece options, or review the equipment product directory.
Request the current specification sheet, compatible handpiece list and wholesale quotation. Exact compatibility, processing instructions and documentation must be confirmed for the ordered model. No clinical settings or treatment techniques are prescribed on this page.
Frequently Asked Questions
Does the motor itself run at 200,000 rpm?
No. The supplied motor range is 2,000–40,000 rpm. The 200,000 min⁻¹ maximum appears in the chart for a compatible 1:5 speed-increasing handpiece.
Are handpieces included?
The illustrated kit lists the control unit, motor, manual, spare parts and DC adapter. Confirm your required handpiece separately in the quotation.
What must be checked before connecting to a dental unit?
Confirm the exact 2-hole or 4-hole connector configuration, approved adapter, utilities and handpiece compatibility with the supplier and a qualified equipment technician.
Can the entire control unit be sterilized?
Do not assume the control unit, cable and motor share a processing method. Request the current instructions for each component, including cleaning, maintenance and any validated sterilization process.
Need Dental Equipment Pricing or Configuration Details?
Contact RIXI Medical for model comparison, distributor pricing, packaging information, OEM/ODM requirements and after-sales support.
Request Product Information
